Pass 70-412 exam with valid 70-412 dumps

Microsoft 70-412 dumps has given a new direction to Microsoft MCSA: Windows Server 2012 industry. It is now considered as the platform which leads to a brighter future. 70-412 dumps is best to pass 70-412 Configuring Advanced Windows Server 2012 Services exam. 70-412 dumps Questions will help you to pass 70-412 exam in the first attempt.

Pass 70-412 exam with valid 70-412 dumps

1. Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2.
All servers have the Hyper-V server role and the Failover Clustering feature installed.


You need to replicate virtual machines from Cluster1 to Cluster2.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

 
 
 
 
 

2. You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk. On Server1, the disk that contains the operating system fails. You replace the failed disk. You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).
What should you do?

 
 
 
 

3. You have a virtual machine named VM1 that runs on a host named Host1. You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1. You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?

 
 
 
 

4. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.
What should you do?

 
 
 
 

5. You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2. You fail to start VM1 and you suspect that the boot files on VM1 are corrupt. On Server1, you attach the virtual hard disk (VHD) of VM1 and you assign the VHD a drive letter of F. You need to repair the corrupt boot files on VM1.
What should you run?

 
 
 
 

6. You have a server named LON-DC1 that runs Windows Server 2012 R2.
An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)


You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target. VirtualiSCSIl.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit value of 0.
What should you do?

 
 
 
 

7. Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running Windows Server 2012 R2. You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort.
What should you do first?

 
 
 
 

8. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. You need to configure a custom Access Denied message that will be displayed to users when they are denied access to folders or files on Server1.
What should you configure?

 
 
 
 

9. You have a server named Server1 that runs Windows Server 2012 R2.
The storage on Server1 is configured as shown in the following table.


You plan to implement Data Deduplication on Server1. You need to identify on which drives you can enable Data Deduplication.
Which three drives should you identify? (Each correct answer presents part of the solution. Choose three.)

 
 
 
 
 

10. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. You are creating a central access rule named TestFinance that will be used to audit members of the Authenticated Users group for access failure to shared folders in the finance department. You need to ensure that access requests are unaffected when the rule is published.
What should you do?

 
 
 
 

11. You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard. You discover that the new virtual disk has a write-back cache of 1 GB. You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?

 
 
 
 

12. Topic 2, Volume B

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You configure File Services and DHCP as clustered resources for Cluster1. Server1 is the active node for both clustered resources. You need to ensure that if two consecutive heartbeat messages are missed between Server1 and Server2, Server2 will begin responding to DHCP requests. The solution must ensure that Server1 remains the active node for the File Services clustered resource for up to five missed heartbeat messages.
What should you configure?

 
 
 
 
 
 
 
 
 
 
 
 

13. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.
What should you configure?

 
 
 
 
 
 
 
 
 
 
 
 

14. Information and details provided in a question App1y only to that question. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information locally on each node. You need to ensure that when users connect to WebApp1, their session state is maintained.
What should you configure?

 
 
 
 
 
 
 
 
 
 
 
 

15. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts Application data. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highly available access to Folder1. The solution must support DFS Replication to Folder1.
What should you configure?

 
 
 
 
 
 
 
 
 
 
 
 

16. Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. Server3 currently has no virtual machines. You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)

 
 
 
 
 

17. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1 that runs a Server Core Installation of Windows Server 2012 R2. File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day. You discover that volume D is almost full. You add a new volume named H to File1. You need to ensure that the shadow copies of volume D are stored on volume H.
Which command should you run?

 
 
 
 

18. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has a single volume that is encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured to perform a daily system image backup. The motherboard on Server1 is upgraded. After the upgrade, Windows Server 2012 R2 on Server1 fails to start. You need to start the operating system on Server1 as soon as possible.
What should you do?

 
 
 
 

19. Your network contains two servers that run Windows Server 2012 R2 named Server1 and Server2. Both servers have the File Server role service installed. On Server2, you create a share named Backups. From Windows Server Backup on Server1, you schedule a full backup to run every night. You set the backup destination to \Server2 Backups. After several weeks, you discover that \Server2Backups only contains the last backup that completed on Server1. You need to ensure that multiple backups of Server1 are maintained.
What should you do?

 
 
 
 

20. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas of each other. Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1. You need to verify whether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible to clients.
What should you do from Hyper-V Manager?

 
 
 
 

Windows Server 2012 70-410 Exam Questions
New 70-774 dumps ensure your success in the first try

Add a Comment

Your email address will not be published. Required fields are marked *