Windows Server 2012 70-410 Exam Questions

70-410 Installing and Configuring Windows Server 2012 is for MCSA: Windows Server 2012 certification, which is part one of a series of three exams that test the skills and knowledge necessary to implement a core Windows Server 2012 infrastructure in an existing enterprise environment.

MCSA: Windows Server 2012

  • 70-410 Installing and Configuring Windows Server 2012
  • 70-411 Administering Windows Server 2012
  • 70-412 Configuring Advanced Windows Server 2012

Now complete your 70-410 exam first. Read Free Windows Server 2012 70-410 Exam Questions for Checking:

1. Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2. You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.
The new domain controller will have the following configurations:
• Schema master
• Global catalog server
• Active Directory Federation Services server role
• Active Directory Certificate Services server role
You need to identify which configuration can be fulfilled by using the Active Directory Domain Services Configuration Wizard.
Which configuration should you identify?

 
 
 
 

2. Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2.
The domains and the sites are configured as shown in following table.


When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?

 
 
 
 

3. You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume. You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?

 
 
 
 

4. You have a server named Server1 that runs Windows Server 2012 R2. You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):


You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?

 
 
 
 

5. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?

 
 
 
 

6. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1.
Which cmdlet should you run?

 
 
 
 
 
 
 
 

7. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to add a new domain controller to the domain. You install Windows Server 2012 R2 on a new server named DC3.
Which cmdlet should you run next?

 
 
 
 
 
 
 
 

8. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to prevent User1 from changing his password. The solution must minimize administrative effort.
Which cmdlet should you run?

 
 
 
 
 
 
 
 

9. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You reconfigure DC2 as a member server in the domain. You need to add DC2 as the first domain controller in a new domain in the forest.
Which cmdlet should you run?

 
 
 
 
 
 
 
 

10. Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.


You install a network monitoring application on VM2. You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?

 
 
 
 
 
 
 
 
 
 
 

11. You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2. You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)

 
 
 
 
 

12. You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots. You need to modify the snapshot file location of VM1.
What should you do?

 
 
 
 

13. You have virtual machine named VM1. VM1 uses a fixed size virtual hard disk (VHD) named Disk1.vhD. Disk1.vhd is 200 GB. You shut down VM1. You need to reduce the size of disk1.vhd .
Which action should you select from the Edit Virtual Hard Disk Wizard?

 
 
 
 

14. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?

 
 
 
 

15. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1. VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1.
What should you do first?

 
 
 
 

16. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. You create a new inbound rule by using Windows Firewall with Advanced Security. You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation (NAT) device on the network.
Which setting in the rule should you configure?

 
 
 
 

17. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. A server named Server1 is configured to encrypt all traffic by using IPSec. You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec.
What should you do?

 
 
 
 

18. You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk.
Which tool should you use?

 
 
 
 

19. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3. On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10. You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?

 
 
 
 

20. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has six network adapters. Two of the network adapters are connected to a network named LAN1, two of the network adapters are connected to a network named LAN2, and two of the network adapters are connected to a network named LAN3. You create a network adapter team named Team1 from the two adapters connected to LAN1. You create a network adapter team named Team2 from the two adapters connected to LAN2. A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP. You need to identify how many DHCP reservations you must create for Server1.
How many reservations should you identify?

 
 
 
 

Real Azure Administrator Associate AZ-102 Practice Questions
Pass 70-412 exam with valid 70-412 dumps

Add a Comment

Your email address will not be published. Required fields are marked *